Skip to Content
Stage Blocks
Home
Products
Support
0
0
Stage Blocks
Home
Products
Support
0
0
Home
Products
Support
Products List Slice4 HDBaseT
HDBT-2.PNG Image 1 of 3
HDBT-2.PNG
HDBT-1.PNG Image 2 of 3
HDBT-1.PNG
HDBT-3.PNG Image 3 of 3
HDBT-3.PNG
HDBT-2.PNG
HDBT-1.PNG
HDBT-3.PNG

Slice4 HDBaseT

$949.00
sold out

Slice a single 4K output from your Mac into four separate HDBaseT signals. Use SLICE4 to connect four projectors to a single port on any Mac, then use software like QLab or MadMapper to map them separately.

HDBaseT is transmitted over basic Cat-6 cables and can be carried over much greater distances than HDMI. Most professional projectors have HDBaseT input.

Unlike other display slicers which compromise on image quality or maximum resolution, the SLICE4 uses advanced FPGA technology to prevent quality loss. All outputs are WUXGA 1920×1200 resolution, the same as most theatrical projectors.

SLICE4 is designed to be plug-and-play, with no complex configuration software or confusing menus to navigate. Just connect it to your Mac with the included USB-C to DisplayPort cable and tell your video mapping software to use it as a 2x2 slicer.

Includes a locking 12V power adapter.

Add To Cart

Slice a single 4K output from your Mac into four separate HDBaseT signals. Use SLICE4 to connect four projectors to a single port on any Mac, then use software like QLab or MadMapper to map them separately.

HDBaseT is transmitted over basic Cat-6 cables and can be carried over much greater distances than HDMI. Most professional projectors have HDBaseT input.

Unlike other display slicers which compromise on image quality or maximum resolution, the SLICE4 uses advanced FPGA technology to prevent quality loss. All outputs are WUXGA 1920×1200 resolution, the same as most theatrical projectors.

SLICE4 is designed to be plug-and-play, with no complex configuration software or confusing menus to navigate. Just connect it to your Mac with the included USB-C to DisplayPort cable and tell your video mapping software to use it as a 2x2 slicer.

Includes a locking 12V power adapter.

Slice a single 4K output from your Mac into four separate HDBaseT signals. Use SLICE4 to connect four projectors to a single port on any Mac, then use software like QLab or MadMapper to map them separately.

HDBaseT is transmitted over basic Cat-6 cables and can be carried over much greater distances than HDMI. Most professional projectors have HDBaseT input.

Unlike other display slicers which compromise on image quality or maximum resolution, the SLICE4 uses advanced FPGA technology to prevent quality loss. All outputs are WUXGA 1920×1200 resolution, the same as most theatrical projectors.

SLICE4 is designed to be plug-and-play, with no complex configuration software or confusing menus to navigate. Just connect it to your Mac with the included USB-C to DisplayPort cable and tell your video mapping software to use it as a 2x2 slicer.

Includes a locking 12V power adapter.

Products
Support

Stage Blocks is a theatrical infrastructure manufacturer. We design our products to solve real problems on real shows.